Photo: ITI Online is here. Click the image above to view the full infographic.

Dear Friend,

Rigging Gear Inspector Level III Course Added to ITI Washington Training Center in July

In response to demand, ITI is adding a second Rigging Gear Inspector Level III Course to the schedule for the Washington Training Center. The open enrollment course is slated for July 18-20, and limited openings are still available. Course information is as follows:

Rigging Gear Inspector Level III

2.4 CEU | 3 Days | $1,495

The Rigging Gear Inspector Level III Course is designed for those who have attained a Level II Rigging Gear Inspector Qualification from ITI. The course covers product application and troubleshooting, field analysis, field inspection processes, fabrication and quality control, wear and abuse prevention, and problem-solving techniques for wire rope, wire rope slings, synthetic web and round slings, chain slings, rigging hardware and below-the-hook lifting devices.

Accident Investigation Course - June 21-23

There are still seats available for the June Accident Investigation Course. Click below to watch the course video!

Mobile Crane Load Chart Fundamentals Webinar - May 31

ITI Assistant Technical Director Joe Kuzar will provide all webinar attendees the basic foundational knowledge needed to properly utilize a mobile crane load chart.

Learning objectives include:

• Terminology commonly used concerning load charts
• Components of load charts
• The process of determining load chart rated capacities

Be sure to attend the live webinar so you can participate in the Q & A session at the end of the session. REGISTER TODAY!