Skip to content
Industrial Training InternationalMay 4, 2015 5:00:00 AM< 1 min read

Safety Week 2015: ITI Daily Toolbox Talk 1 of 5

Safety Week 2015: ITI Daily Toolbox Talk 1 of 5

In Rigging, Somtimes 4 = 2


When making lifts using various pick points on a load, the rigger must review the weight and the location of the load's center of gravity (CG) to determine the amount of load he can anticipate at each pick point. The distribution of the load's weight to the pick points is dependent on the proportional split - north:south and west:east.

Visit http://www.iti.com/safetyweek to download the full pdf!

avatar

Industrial Training International

Cranes | Rigging | Lift Planning | Engineering | VR Simulation

COMMENTS

RELATED ARTICLES