In anticipation of the April 2015 installment of the ITI Showcase Webinar Series – Rigging Gear Inspection Crash Course, it’s a good idea to get a baseline knowledge level on this topic to help identify strengths and weaknesses. The Webinar is set for Wednesday, April 29 at 10 AM Pacific Time/1 PM Eastern Time. Test your knowledge of OSHA regulations, ASME standards and manufacturer recommendations for usage below.
A: Heat or friction damage
A: No
A: Rust or corrosion
A: Forging
A: 10%
A: Turnbuckle
A: Manufacturer's name, capacity, and size
A: Zinc and epoxy resin
A: 10 broken wires in a lay, 5 in one strand in one lay
A: Crushing
Compare the number you answered correctly to the scale below. Be honest, the only person you are cheating is yourself!
Number Correct | Action Plan | How You Probably Feel Right Now |
0-3 | You are probably new to the industry, or you just had a bad day. It happens to the best of us! Here is the good news - there is a webinar coming up that will help you hone your skills and grow your knowledge. REGISTER HERE. | |
4-7 | Not too shabby. You have a pretty good idea of the basics, but there is definitely room for improvement. Here is the good news - there is a webinar coming up that will help get you to the next level. REGISTER HERE. | |
8-10 | Well done! Great performance, but you know what? Even the best of the best constantly work to perfect their craft. Here is the good news - there is a webinar coming up that will help you refine your skills and maintain your level of excellence. REGISTER HERE. | |
If you have questions about this webinar or any of the previous Showcase Webinars, please send your questions to webinars@iti.com.